PERSTORP A.B. - Company Profile, Information, Business Description, History, Background Information on PERSTORP A.B.



S-28480
Perstorp
Sweden

History of PERSTORP A.B.

At a small mill on the edge of a beechwood forest in the southern tip of Sweden, Wilhelm Wendt founded Perstorp A.B. in 1881. Stensmölla Kemiska Tekniska Industri, as it was originally called, was initially dedicated to product development and refinement of its only source of raw materials, the beechwood forest. Today the company is no longer dependent upon wood products; however, it still produces many of its original product line begun almost a century ago. Perstorp presently concentrates its efforts on integrating its refining process and focusing its resources on the international market.

Originally, charcoal was the only commercial product at the Stensmölla Kemiska Tekniska Industri. However, after he had established his own company Wendt, an engineer, built a purification plant to separate useful products from waste in the fene gases captured during the carbonizing process to produce acetic acid and wood alcohol. The production of acetic acid began in 1884.

Wilhelm convinced skeptical Swedish housewives that this new acetic acid vinegar made from beechwood was better than the alcohol-base vinegar that they had used and trusted for years. The new stock lasted longer, tasted better, was less expensive, and stayed fresh longer than its competitor. The acetic acid won many prizes at exhibitions in Chicago, Lubeck, Copenhagen and Göteberg. When combined with a winning advertising campaign, this helped Wendt to achieve the first commercial success at his new company.

By 1888, the company grew to employ 16 people in the production of charcoal and acetic acid. During this time Wendt also shortened the company's name to Sk&aring#ka Ă„ttiksfabriken. Due to the fact that he did not always have access to the raw materials he needed, Wendt decided that he would have to maximize the refining process to make the company profitable. In 1898, therefore, he built a refinery to separate wood alcohol into pure methanol, chemical acetin, an acetin substitute and woodnaphta denaturating methanol.

From 1900 to 1904 the company was confronted with financial problems. In order to overcome these problems Wendt constantly reinvested all of the liquid assets back into the company. In 1904 Wendt built a new plant to produce cresote, carbinoleum and pitch from pine tar and other carbonization processes. During the Russo-Japanese War cresote was issued to Japanese soldiers to prevent dysentery. Wendt sold all of the cresote his company could manufacture to Japan. In 1905 Wendt built a new factory designed to convert methanol to formalin. Formalin, or formaldehyde, was first sold as a disinfectant.

Between the years 1907 and 1914 the company barely met operating costs. Despite the company's dismal financial outlook and Sweden's continuing economic crisis, Wendt continued to heavily fund his product development experiments. At the start of World War I in 1914, however, acetic acid sales were so optimistic that Wendt built a glass factory to produce the bottles for the acid. Sales in the new glassworks were supplemented by the production of commercial lighting glass for export to England.

As World War I continued, Wendt realized that he could capitalize on Germany's inability to export products. He began producing acetyl acid which had previously been imported from Germany. The company's pharmaceutical factory, begun in 1905, expanded its product line to include urotropine, or hexamethylenetetramine, which during those days was considered effective against polio and other diseases.

During this time the sawmill became an integral part of the company's raw materials production. The timber from the mill was now distributed so that the best pieces would go to the newly established furniture factory; pieces would go to the packaging plant for acetic acid bottles; some would go for producing butter churns, which had been a product at the mill since Wilhelm Wendt's father started the mill; and the worst pieces would be used to fire the burners in the mill.

During the war years Wendt employed a well-educated Indian chemist named Das Gupta in the company's pharmaceutical laboratory. Das Gupta's job was to develop a new pharmaceutical product that would compete with the German manufacturers after the war was over. He discovered, after many experiments, a substitute shellac with excellent insulating properties named "indolac." Das Gupta then took the indolac, mixed it with pitch and tar, and created a plastic, or Isolit, as it was called at Sk&aring#ka Ă„ttiksfabriken. The new raw material was the Swedish version of the German bakelite, which had been on the market for years and was protected by a large number of patents. Fortunately for the company, the Germans decided not to take the matter to court.

In 1917 Sk&aring#ka began manufacturing its first plastic product, a handle for electrical knife switches. The first products were riddled with problems and were discarded in the stream that ran through the area. When factory officials decided this was not safe, Sk&aring#ka dumped the defects in a designated area behind the plant. Isolit's production constituted the birth of Scandinavia's first plastic products.

The radio industry soon became the primary customer of Isolit products. In 1923 Sk&aring#ka Ă„ttiksfabriken began producing laminates, or the strong, brown board in a radio which electrical parts are mounted on. The industrial grade laminate began as (and still remains) the single, largest-selling product for the company. Also, the company's furniture factory became Sweden's largest manufacturer of radio cabinets.

In the early 1920's Sk&aring#ka's chemists, after adding a shiny surface to the industrial laminate, discovered decorative laminates. This new product resisted wear and tear, heat and chemicals. In the mid-1930's Sk&aring#ka Ă„ttiksfabriken introduced beech parquet. However, because the beech parquet, used as floorboards, had been dried too much, expanded, and subsequently caused a number of household accidents, the company became involved in many lawsuits and was forced to pay substantial damage costs.

During World War II Sk&aring#ka refined many tons of charcoal used to manufacture a substitute gas for Sweden's passenger cars. Again, Sk&aring#ka's production suffered from lack of raw materials. To fuel the modern charcoal plant Wendt's son, Otto, was forced to cut up millions of parquet boards, which actually turned out to be more economical for the company at this time than selling them on the open market.



When World War II ended in 1945, and as the European countries began piecing their industries and economies back together again, Sk&aring#ka's production was no match for its competitors. Sk&aring#ka, although no longer the only plastics company in Scandinavia, was the largest with a product line of more than 10,000 items.

After the war, when Swedish gasoline was placed back on the market, Sk&aring#ka was faced with disposing of many tons of charcoal. The solution to this problem involved selling the excess charcoal to the carbon bisulphide industry. Thus, in the early 1950's the company began breaking the dependency link between coal and chemicals. The company did not completely stop operations at the charcoal burning plant until 1970 when environmental controls also became a factor. However, with the purchase of a small barbecue charcoal and industrial coal plant, Sk&aring#ka never really eliminated coal from its activities.

The company's carefully established chain of raw materials network was finally broken in 1952 when Sk&aring#ka began using methanol purchased from outside sources to manufacture its formalin. And, in 1967, the saw mill, another important part of the raw materials chain, closed its operation.

After an illness during the early 1950's, Otto Wendt was forced to relinquish some management of the day to day operations of the plant. For the first time at Sk&aring#ka Ă„ttiksfabriken new methods of planning, budgets, market analysis were implemented. The company placed new emphasis on quality and on long-term low risk projects, rather than the short-term speculation that had characterized its operations before 1945. Sk&aring#ka also began making efforts to establish business contacts in export markets. It was during this time that the company established a plant in Brazil for the production of laminates.

The next twenty years became the era of the decorative laminate. It was so successful that Sk&aring#ka could not produce enough to meet the demand of the Swedish market. Since this lack of production was due largely to a constant labor shortage because of the lack of housing for employees, the company helped solve the problem by collaborating with the town of Perstorp to develop new housing facilities.

In 1955 Sk&aring#ka began producing the polyalcohol trimethylolopropane, intended primarily for the paint industry. The company's interest in polyalcohols began in the 1940's when Otto Wendt used profits from the charcoal operations to fund a study at the University of Lund. As a war concession at the end of World War II, the German chemical industry was forced to open up the contents of its patents and process descriptions. Like other chemical companies at the time, Sk&aring#ka incorporated many of the German ideas into its production methods. Some of these ideas were incorporated into Sk&aring#ka development of a polyalcohol based on formalin called pentaerythritol.

In 1955 Otto Wendt relinquished the daily management of the company to his brother-in-law, Olle Nauclér. Prior to this appointment, Nauclér served as chairman of the board of directors for ten years. Otto Wendt, however, continued to serve as chairman of Sk&aring#ka Ättiksfabriken.

By 1956 the company turned its attention to the export market. Despite intense competition, the company was quite successful. Sk&aring#ka's success was due to three critical factors: first, the company carefully chose its agents abroad; second, it invested funds to maintain a large inventory; and third, the company also instituted a successful marketing strategy aimed directly at the consumer.

Formalin, the primary raw material in Sk&aring#ka's polyalcohols, was also an important ingredient in several other products. In 1958, in a mutual exchange of information with Reichhold Chemicals, Sk&aring#ka received valuable information about several products, one being formalin. In 1959 Sk&aring#ka began using Reichhold's inexpensive method of producing formalin called Formox.

Like Otto Wendt, Olle Nauclér advocated increased research, especially in the field of thermoplastics. During this period, Nauclér established the Perstorp Research Foundation for research projects. During his 15 years as president, he prepared the company for a larger market. To ensure the company's access to private venture capital and to reduce the chance of a takeover, Nauclér extended ownership of the company and placed its shares on the open market. He also added new members to the board of directors that were outside the circle of family relations. In addition, Sk&aring#ka Ättiksfabriken A.B. officially changed its name to Perstorp A.B.

In 1970 Perstorp's shares went on the open market. More than 700 employees took advantage of Perstorp's special offer and became some of Perstorp's initial shareholders. Olle Nauclér retired in 1970 and Gunnar Wessman took over as president of Perstorp. This marked the first time in the company's 90 year history that a member of the Wendt family was not among the executive management staff. The Wendt's were (and still are), however, represented on the board of directors. The company then began its program of international expansion first initiated in the 1950's.

In 1970 Perstorp acquired one of the largest laminate producers in Great Britain. Perstorp also purchased a polyalcohol plant in the United States. Gunnar Wessman, during this time, began a modernization of Perstorp's organizational structure. Under the motto "Security is based on change," Wessman introduced divisionalism whereby Perstorp decentralized its decision-making processes.

Karl-Erik Sahlberg became president of Perstorp in 1975. Under his direction, all product development was concentrated in the separate divisions. Perstorp created Pernvo A.B., Perstorp's New Business Development, in order to ensure that long-term projects were not neglected for the short-termed return on investments employed by the divisions. In 1984 Perstorp again changed its organizational structure to represent the nine market-oriented business areas. These include: Perstorp additives; Perstorp Chemitec; Perstorp compounds; Perstorp electronics; Perstorp specialty chemicals; Perstorp components; Perstorp plastics systems; Perstorp surface materials; and Pernvo.

In 1982 Perstorp bought the amino plastics operation of Italy's Resem SpA. With this purchase, Perstorp became the world's leader in the production of amino plastics. In 1983 Perstorp acquired Pispalan Werhoomo Oy and Tunhems Industri A.B. In the fall of 1984 Perstorp entered the biotechnology field. Perstorp Analytical, a division of Perstorp Biotec, acquired Lumac BV of Holland, a manufacturer of analytical systems for industrial microbiology, from 3M Corporation of the United States. In addition, Perstorp A.B. acquired the Swedish company, ServoChem A.B., which develops analytical instruments for the brewery industry.

In November of 1985 Perstorp Chemitec acquired LaBakelite S.A. of France. LaBakelite is one of the largest manufacturers of resins and phenolic molding compounds in Europe. In the same year Perstorp acquired the seamless flooring and wall covering portion of the Swedish Gunfred Group, which has been incorporated into Perstorp Chemitec. Pernvo Inc. of the United States acquired minority shareholdings in Health Products Inc. (Michigan) and R Cubed Composites Inc. (Utah), while selling all of its shares in Composite Craft Inc.

Perstorp has managed to integrate new items into its product line, some of which the company has produced for almost one hundred years. By dividing the activities of the company to cater to different markets, Perstorp will continue its success. The future for the chemical industry on the whole depends on product development as well as market share. Perstorp's commitment to developing both new products and a larger market share will give the company a definite advantage in the years to come.

Principal Subsidiaries: Drycolor A.B.; Pernvo-Perstorp New Business Development A.B.; Perstorp Administration A.B.; Perstorp Biotec A.B.; Perstorp Chemitec A.B.; Perstorp Compounds A.B.; Perstorp Contilam A.B.; Perstorp Elektronik A.B.; Perstorp Far East A.B.; Perstorp Finanskon A.B.; Perstorp Form A.B.; Perstorp Kemi A.B.; Perstorp Komponent A.B.; Perstorp Konsument A.B.; Perstorp Plastsystem A.B.; Perstorp Pressmassor A.B.; Perstorp Produkter A.B.; Perstorp Regeno A.B.; Perstorp Specialkemi A.B.; Perstorp Ytmaterial A.B.; Perform A.B.; System Dishman A.B.; Perstorp do Brasil Industria e Comercio Ltds (Brazil); Perplast B.V. (Amsterdam); Skogens Kol A.B. (Kilfors); Perstorp Ltd. (Toronto); Perstorp Oy (Helsinki); Perstorp S.A. (Paris); Perstorp SpA (Milan); Sythecolor S.A. (Paris); LTIS S.A. (Matra); Lumac B.V. (Holland); Pharma SpA (W. Germany).

Additional Details

User Contributions:

Comment about this article, ask questions, or add new information about this topic: